Ceramic Lined Pipe Elbow

$52.00 | 5 piece(Min.Order)

The ceramic lined pipe elbow, is manufactured by the self-spreading combustion high-temperature clutch synthesis method.The tube from the inside to the outside are corundum ceramic, transition layer, steel three layer. The ceramic lined pipe gives full play of high strength, good toughness, impact resistance, good welding performance of steel pipe, and high hardness, high wear resistance, corrosion resistance, good heat resistance of corundum ceramic, overcoming the low hardness, poor wear resistance of steel pipe and poor toughness of ceramic. Therefore, the ceramic lined pipe elbow has good wear resistance, heat resistance, corrosion resistance and resistance to mechanical shock and thermal shock and other comprehensive performance. It is an ideal wear-resistant and corrosion-resistant pipe elbow for conveying granular materials, grinding, corrosive media, etc.

Send Inquiry

Add To Cart

Product Introduction

Metallurgy and electric power industry conveying coal powder, ash slag, slurry, lime gypsum slurry, so it need to consume a lot of pipes every year. The use of ceramic lined pipe elbow has the characteristics of high wear resistance, long life, easy installation and remarkable economic benefits. The ceramic lined pipe elbow has been tested by long time operation and proved that its wear-resisting effect is more outstanding than other elbows. Compared with other elbows, one of the outstanding advantages of ceramic lined pipe elbow is its price, which is only one-half of the price of alloy elbow, while its service life is two to three times of the latter, which means that its actual cost of use is only about 20% of that of alloy elbow. Its other advantages lie in the weight and thickness of the ceramic lined pipe elbow. Its smaller thickness and lighter weight reduces the stress on the entire equipment support structure after installation, potentially increasing the service life of the support structure and reducing maintenance costs for the entire system.

product-297-344 (Ceramic steel pipe 90° elbows)

Product parameters

Ceramic-lined composite steel pipe acid resistance (according to acid-resistant ceramic standard)

Material	10%HCL+10%H2+10%HNO3 heated at 90℃ for 5 hours
Acid-resistant ceramics	80%
Ceramic lining composite steel pipe	96-98%