Ceramic Burner Tube

$80.00 | 5 piece(Min.Order)

Ceramic burner tubes are manufactured using the self-propagating high temperature synthetic-centrifugal method. The seamless steel tube will be placed in the tube mold of the centrifuge, add iron oxide powder and aluminum powder mixture in the steel tube, this mixture is called aluminum thermite in chemistry. Centrifuge tube mold rotation reaches a certain speed, by a spark ignited aluminum thermite, aluminum thermite immediately burn themselves, the combustion wave spreads rapidly, in the spread of violent chemical reactions. The final formation of ceramic burner tube from the inside to the outside were corundum ceramic layer, iron based transition layer, as well as the external steel tube layer.

Send Inquiry

Add To Cart

Product Characteristics

1. Good abrasion resistance.

2. Small running resistance.

3. Low project cost; ceramic burner tube due to light weight, service life increased, so that the cost of the support bracket, handling costs reduced, the average investment decreased. ceramic burner tube of the total cost of the project with the cast stone tube is comparable to the cost of the project compared with wear-resistant steel tube down 20-30%.

4. Corrosion resistance, anti-scaling.

5. Good temperature resistance: ceramic burner tube can be in -50 ~ 900 ℃ temperature range of long-term normal operation, the material coefficient of linear expansion of 6 ~ 8 × 10-6 ℃.

6. Easy to install and construct: the product is light in weight, compared with other tubes of the same diameter, can save 20-30% of steel, and has a good combination of heat resistance and mechanical shock resistance, etc., can be welded, flange fast and other coupling methods, construction and installation is convenient, can reduce the installation costs.

Product Parameter

Corrosion resistance of ceramic burner tube(according to stainless steel test standard)

Material

10%HCL

(g/m2·h)

10%H2SO4

(g/m2/h)

30% Acetic Acid

(g/m2/h)

30%NaOH

(g/m2/h)

Stainless Steel