Ceramic Lined Composite Pipe Tee

$80.00 | 5 piece(Min.Order)

Since the ceramic lining composite pipe tee is made of corundum ceramic (a-AL2O3), the Mohs hardness can reach 9.0, which is equivalent to HRC90 or higher. Therefore, it has high wear resistance to the abrasive media transported by metallurgy, electric power, mining, coal and other industries. Proved by industrial operation: its wear-resistant life is ten times or even dozens of times that of quenched steel.

Send Inquiry

Add To Cart

Product content

The inner surface of the ceramic-lined composite pipe is smooth and never corrodes, unlike seamless steel pipes with convex spirals on the inner surface. The internal surface roughness and clear water resistance characteristics of the relevant testing units have been tested, and the internal surface smoothness is better than that of any metal pipe, and the clearing resistance coefficient is 0.0193, which is slightly lower than that of seamless pipes. Therefore, the tube has the characteristics of low running resistance, which can reduce the running cost.

Product parameters

Ceramic-lined composite steel pipe acid resistance (according to acid-resistant ceramic standard)

Material

10%HCL

(g/m2·h)

10%H2SO4

(g/m2/h)

30%acetic acid

(g/m2/h)

30%NaOH

(g/m2/h)

Stainless steel1Cr18Ni9Ti