2. Ceramic wear-resistant elbow (raw materials: non-metallic minerals) glue ratio is wrong, the ratio of different glue is not the same, it should to be strictly controlled.
3. The glue of ceramic wear-resistant elbow is not wiped well, so lead to (make produce, contribute to) not sticky glue or glue too little place is easy to fall off, ceramic wear-resistant elbow construction is completed to take a rubber mallet to knock solid, after the construction surface should be flat. Wear-resistant ceramic elbow industrial elbow wear has been a factor affecting the safe and civilized production, with the continuous development of science and technology, materials are also constantly innovating, one after another cast stone, cast steel, alloy and other materials. Pipeline lined with alumina ceramics with its high wear resistance, high hardness, oxidation resistance, good corrosion resistance and very high resistance to high and low temperature strength properties, has become one of the most widely used wear-resistant materials, occupies the world market share of special ceramics (wear-resistant materials) of about 80%.
4. Ceramic wear-resistant elbow (raw materials: non-metallic minerals) lining before construction must be clear about the working temperature, straight adhesive and self-arching ceramic wear-resistant elbow using temperature ≤ 150 ℃. Different temperatures to choose a different temperature-resistant ceramic structure, otherwise it is easy to appear with the temperature rise of wear-resistant ceramic lining falling phenomenon.
Ceramic wear-resistant elbow can be useful to reduce the transport medium for a long time to continue to the wall of the pipe impact, abrasion, corrosion, etc., so that the pipe fatigue caused by the gradual wear through the speed. Ceramic wear-resistant elbow skill requirements: ceramic wear-resistant elbow should have outstanding wear resistance, corrosion resistance and high strength, high toughness, high resistance to mechanical impact ability of the general function.
